If the dryer is clicking but not starting, it could be because the dryer belt has broken or become loose. With the drive motor and idler pulley, the dryer belt rotates the dryer drum. The dryer belt wraps around the dryer drum. If the multimeter needle does not move or the display does not change significantly, the switch does not have continuity and will need to be replaced.
#Frigidaire gallery stack dryer turn off buzzer manual
Check your dryer manual if you are unsure of its location. The door switch on front-loader dryers can usually be accessed by removing the dryer door panel. On top-loader dryers, the door switch is typically accessed by removing the control panel and lint trap.However, it still pays to check the door switch with a multimeter. If you can hear the door switch clicking, it is most likely working. Checking the door switch can be as easy as listening to the clicking sound of the door switch when you close the dryer door. Sometimes, the door switch will malfunction or the connection becomes loose, causing the dryer to think the door is still open. The door switch on a dryer is another safety precaution designed to stop the dryer from operating when the dryer door is open. If the needle doesn’t move or the display does not change significantly, it does not have continuity and will need to be replaced. The fuse should show a reading of 0 ohms, indicating that it has continuity. Test the thermal fuse for continuity with a multimeter.Remove the thermal fuse from the dryer or isolate it.Check your dryer manual to locate it on your model. On other models, the bottom-front panel can be removed to access the fuse. On most models, the thermal fuse can be accessed by removing the rear panel of the dryer.Disconnect the dryer from the power source.Thermal fuses are fairly easy to remove, and a replacement part can be purchased online for a reasonable price. It usually sits on the blower housing or at the dryer’s heat source. The thermal fuse is typically a white rectangle or oval-like shape, with two wires connected to it. The thermal fuse is tripped if the temperature in the dryer becomes too hot. The thermal fuse is a safety device designed to stop the dryer from catching fire. If your dryer just clicks and will not start, a blown thermal fuse is often the problem. Most of these repairs are easy to do however, issues with the drive motor, control board, and timer may require more advanced knowledge. If these parts are working correctly, the drive motor, idler pulley, belt switch, control board, or timer may be responsible for the issue.
A broken dryer belt is the next most likely cause of the issue. If your dryer will not start and instead makes a clicking noise, it is most likely due to a fault with the door switch, start switch, or thermal fuse.
0 kommentar(er)
